ua Lag luam wholesale FCNS03 Fe Cu Ni Sn Pre Alloyed Powder rau Ceramic Pob Zeb Diamond Hniav Chaw tsim tshuaj paus thiab tsum |SinoDiam
sm_banner ua

cov khoom

FCNS03 Fe Cu Ni Sn Pre Alloyed Powder rau Ceramic Pob Zeb Diamond Hniav

piav qhia luv luv:

FCNS03 Fe Cu Ni Sn Pre Alloyed Powder rau Ceramic Pob Zeb Diamond Hniav 1. Dab tsi yog Pre-alloyed Powder Pre-alloyed hmoov yog ib qho nyuaj, tsawg compressible thiab li no yuav tsum tau ntau dua nias loads los tsim high density compacts.Txawm li cas los xij, lawv muaj peev xwm ua tau cov khoom muaj zog sintered.Pre-alloying kuj tseem siv tau thaum tsim cov khoom siv homogeneous los ntawm cov hmoov nplej yuav tsum muaj qhov kub thiab txias thiab ntev sintering lub sij hawm.Cov piv txwv zoo tshaj plaws yog cov hlau tsis muaj steel, uas nws chr ...


Product Detail

Khoom cim npe

FCNS03 Fe Cu Ni Sn Pre Alloyed Powder rau Ceramic Pob Zeb Diamond Hniav

1. Pre-alloyed hmoov yog dab tsi

Pre-alloyed hmoov yog ib qho nyuaj, tsawg compressible thiab li no yuav tsum tau ntau dua nias loads los tsim high density compacts.Txawm li cas los xij, lawv muaj peev xwm ua tau cov khoom muaj zog sintered.Pre-alloying kuj tseem siv tau thaum tsim cov khoom siv homogeneous los ntawm cov hmoov nplej yuav tsum muaj qhov kub thiab txias thiab ntev sintering lub sij hawm.Cov piv txwv zoo tshaj plaws yog cov hlau tsis muaj hlau, uas nws cov ntsiab lus chromium thiab npib tsib xee yuav tsum tau ua ntej-alloyed kom muaj kev lag luam tsim los ntawm hmoov metallurgy.

2. Cov Parameters ntawmNWS 03

Lub ntsiab lus Fe, Cu, Ni, Sn
Theoretical ntom ntom 7.98 g/m³
Sintering kub 830 ℃
Khoov zog 1150 Mpa
Hardness 104-108 PAB

3. FCNS03 Cim

  • Sintered qauv yog ib yam thiab compact.lub carcass muaj kev tswj zoo ntawm pob zeb diamond, zoo hnav tsis kam thiab sharpness.
  • Cov hmoov yog siv rau nruab nrab mus rau siab zoo granite pob zeb diamond hniav, ceramic txiav hniav.

4. Cov lus qhia ua Ceramic txiav hniav.

  1. Hlau feem pua:
  • (30-50)% FCNS03
  • + (25-35)% Cu
  • + (5-8)% Sn
  • + (2-4)% Ni
  • + Fe rau Blance

B. Pob zeb diamond Grit Loj thiab feem pua:

  • 50/60 @ 30%
  • 60/70 @ 40%
  • 70/80 @ 30%
  • Cov ntsiab lus: (9-12)%

C. Sintering Kub: 840-860 ℃


  • Yav dhau los:
  • Tom ntej:

  • Sau koj cov lus ntawm no thiab xa tuaj rau peb